RSS-SF6-100 Pipeline Infrared SF6 Gas Detector Sensor

Category	Details
Product Model	RSS-SF6-100
Product Name	Pipeline-type Infrared Sulfur Hexafluoride Sensor
Detected Gas	SF₆
Device Measurement Range	(0~100)μL/L, (0~1000)μL/L
Preheating Time	Less than 2 minutes (preheating time)
Linear Error	±1% F.S

The pipeline-type Infrared SF6 Gas Detector Sensor is a gas sensor based on the principle of single-light-source dual-wavelength non-dispersive infrared measurement technology (NDIR). This sensor uses high-end infrared light sources and detectors, and selects gold-plated devices as the optical path channel, which improves the measurement accuracy and stability. By adopting a folded optical path, it shortens the overall size of the sensor and enables precise measurement of small-range gases.

Product Features

High precision and high stability: It adopts high-end infrared light sources and pyroelectric detectors, and selects gold-plated devices as the optical path channel.

Large-range monitoring: Its good selectivity makes up for the deficiency of traditional electrochemical sensors in the selection of high-range measurement ranges.

No fear of harsh environments: With the temperature and pressure compensation technology, stable and reliable measurement results can be obtained even under harsh temperature and environmental conditions.

Long service life: Compared with traditional electrochemical sensors, there is no obvious consumption during use, and its service life is more than 10 years.

Product Parameters

Parameter Name	Parameter Value
Detected Gas	SF₆
Measuring Range	(0~100)μL/L, (0~1000)μL/L
Preheating Time	< 2 minutes (preheating time)
Linear Error	±1% of Full Scale (F.S)
Response Time	< 12 seconds (@500mL/min)
Repeatability	< 1%
Detection Limit	1% of Full Scale (F.S)
Resolution	0.1% of Full Scale (F.S)
Operating Voltage	(3.3~6.5V) DC
Operating Current	Maximum 190mA (Average 90mA); @5VDC
Average Power	< 0.7W
Peak Power	< 1W
Signal Output Mode	UART TTL
Temperature Compensation Range	(-10~40)℃
Operating Humidity	(0~95)%RH (without condensation)
Storage Temperature	(-20~60)℃
Pipeline Pressure Compensation Range	(1~200)kPa