Need Help: Providing Innovative and Sustainable Solutions.
Office Hours: 08:30am-6:00pm
NA1000FD Gas Detection and Alarm Instrument
NA1000FD Gas Detection and Alarm Instrument
Product Information
| Product Model | NA1000FD |
|---|---|
| Product Name | Gas Detection and Alarm Instrument |
| Measurement Range | (0~1500) μmol/mol |
| Allowable Error Limit | ±30 μmol/mol or ±5% (display value) |
| Repeatability | ≤3% |
| Response Time | <60s |
The NA1000FD Gas Detection and Alarm Instrument is based on the technical principle of a dual-wavelength non-dispersive infrared spectrometer (NDIR) and is equipped with high-performance sensors. It can simultaneously conduct real – time monitoring of sulfur hexafluoride, oxygen, temperature, and humidity in the current environment, display the measurement data in real – time, and transmit the monitoring results to the DCS or the host via RS – 485 or Zigbee signals. Meanwhile, it compares the results with the set alarm values. When the alarm conditions are met, the audible and visual alarm will go off, enabling the staff to promptly detect SF6 leakage and oxygen deficiency and take corresponding measures according to the on – site situation.
Product Features
It uses an OLED display to show the current measured concentration information in real – time.
Users can set the alarm values of the measured gases independently according to the characteristics of the measured gases and on – site requirements.
The measurement data, instrument configuration information, and relay status can be remotely transmitted to the host via RS485 or Zigbee.
After power – on, the instrument automatically checks the configuration information (including sensor installation information) and compares it with the factory – set configuration information to determine if there are any sensor faults.
It can upload the configuration information to the host via the RS – 485 bus and has a fault diagnosis function.
The instrument can be calibrated on – site through key operations or remotely calibrated via the host.
It has obtained the EMC Industrial Level 3 Certification.
Product Parameters
Sulfur Hexafluoride (SF6) Parameters
| Parameter Name | Parameter Value |
|---|---|
| Measurement Range | (0 – 1500) μmol/mol |
| Maximum Allowable Error | ±30 μmol/mol or ±5% (display value) |
| Repeatability | ≤3% |
| Response Time | < 60 s |
| Operation Mode | Button – type |
Oxygen (O₂) Parameters
| Parameter Name | Parameter Value |
|---|---|
| Measurement Range | (0 – 25)% |
| Maximum Allowable Error | ±0.5% (volume ratio) |
| Repeatability | ≤1% |
| Response Time | < 60 s |
Other Parameters
| Parameter Name | Parameter Value |
|---|---|
| Temperature – Measurement Range | (-40 – 100) °C |
| Temperature – Maximum Allowable Error | ±2 °C ≤1% |
| Humidity – Measurement Range | (0 – 99) %RH |
| Humidity – Maximum Allowable Error | ±5 %RH |
| Alarm Output – Alarm Relay Contact Capacity – Resistive Load | 5 A@250 VAC, 5 A@30 VDC |
| Alarm Output – Alarm Relay Contact Capacity – Inductive Load | 50 VA |
| Communication – Communication Description | RS – 485 (MODBUS), signal output, up to 32 instruments can be connected in parallel |
| Communication – Connection | Shielded twisted – pair cable |
| Communication – Distance | Maximum 1000 m |
| Input Voltage | ±5 24 VDC±15 % (Note: This expression might be incorrect. Please double – check.) |
| Power | 3 W/channel |
| Insulation Resistance | ≥100 MΩ |
| Insulation Withstand Voltage | 1500 V |
| Dimensions | 174 mm * 110 mm * 66 mm (L * W * H) |
| Weight | 0.6 kg |
Leave a Comment